Motor oil

Castrol Vecton Long Drain 10W-30 E6/E9

For maximum drain intervals

Applications Castrol Vecton Long Drain 10W-30 E6/E9

Castrol Vecton Long Drain 10W-30 E6/E9 is designed for extended drain intervals in the latest Euro 6 diesel engines. It can also be used with low emission Euro 4 and Euro 5 European trucks and buses, especially where a "low SAPS" lubricant is required. Also applicable in older transport and contracting vehicles and equipment that require this performance level.

Your advantage! Price of Castrol Vecton Long Drain 10W-30 E6/E9 drops automatically in larger quantities.

Castrol EDGE FST 10W-60

Properties

Castrol EDGE is three times stronger against viscosity breakdown than the leading synthetic and leading conventional oils.

The unique titanium technology physically changes the way oil behaves under extreme pressures doubling its film strength, preventing oil from breaking down and reducing friction to maximize engine performance.

Castrol EDGE with Fluid Titanium has twice the film strength of our previous formula based on the HFRR friction test.

Tested in 5W-30 versus all major conventional brands, Mobil1 and Mobil1 Extended Performance in the ASTM D6278 test.

Castrol EDGE is available in the following grades: 0W-20, 5W-20, 5W-30, 5W-30 A3/B4, 5W-30 C3, 5W-40, 5W-40 Turbo Diesel, 5W-50, 10W-30, 10W-40 and 10W-60.

Mobil Pegasus™ 710

Gas Engine Oil

Made for stationairy Gas Engines / CHP Combined Heat and Power

Most important applications of Mobil Pegasus™ 710 are:

• + Spark ignited four-cycle gas engines with very low oil consumption
• + Engines experiencing valve train wear and corrosion
• + Engines operating on fuel containing low levels of sulphur and chlorine compounds
• + Reciprocating compressor cylinders compressing natural gas
• + High output or ambient rated engines operating at or in excess of rated capacity under high temperatures

Pay attention! Price of Mobil Pegasus™ 710 drops automatically with higher volumes.

Total Quartz INEO EFFICIENCY 0W-30

GASOLINE & DIESEL ENGINE OIL SAE 0W-30 ADVANCED SYNTHETIC TECHNOLOGY LOW SAPS

Applications Total Quartz INEO EFFICIENCY 0W-30

• TOTAL QUARTZ INEO EFFICIENCY 0W-30 is specially formulated for Diesel and gasoline* engines of German car manufacturers.
• Its low phosphorus, sulphated ash and sulphur content protect post-treatment systems that reduce pollutant emissions.
• TOTAL QUARTZ INEO EFFICIENCY 0W-30 performs in the most demanding driving conditions (city traffic, major roads and motorways).
• This lubricant is suited to every kind of driving, including sports, high-speed and all-season driving.

Mobil Pegasus 1005

Gas engine oil

Main applications of Mobil Pegasus 1005 are:

• + Caterpillar, MWM GmBh (Formerly Deutz Power Systems), Jenbacher, Rolls Royce-Bergen, Wartsila, Waukesha and other naturally inducing medium to high speed 4-stroke engines with pressure filling that require a low ash content
• + Heavily loaded "poor mixture" and stoichiometric 4-stroke engines operating under high operating temperatures
• + High speed, 4-stroke engines in cogeneration applications
• + Gas engines equipped with catalysts
• + Applications that use alternative fuels with low sulfur or chlorine levels
• + Exploration test runs with acid gas containing up to ‹0.1% (1000 ppm) H-2-S may be used as fuel

Your benefit : Price Mobil Pegasus 1005 automatically drops with larger quantities.

CASTROL Hyspin Spindle Oil E 5

Spindle Oils

Application CASTROL Hyspin Spindle Oil E 5

Castrol Hyspin Spindle Oils have been specially formulated to provide outstanding protection against rust and oxidation while demonstrating good lubricity. These types of oils are also referred to as "R and O" oils. Castrol Hyspin Spindle Oils are designed for use in all types of spindle bearings, including high-speed spindle bearings. Spindle E5 has an additional oiliness agent for enhanced lubricity. Castrol Hyspin Spindle Oils are fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers. Hyspin Spindle Oils are classified as follows: DIN 51502 classification – HL ISO 6743/4 - Hydraulic Oils Type HL ISO 6743/2 – Spindle Oils Type FC Hyspin Spindle oils meet or exceed the following industry specifications: Cincinnati Lamb (formerly Milacron) P-45 (FC-22) - Spindle Oil 22 Cincinnati Lamb (formerly Milacron) P-62 (FC-10) - Spindle Oil 10 Cincinnati Lamb (formerly Milacron) P-65 (FC-2) - Spindle Oil 2

Your advantage! Price of CASTROL Hyspin Spindle Oil E 5 drops automatically in larger quantities.

CASTROL Perfecto X 32 previously Perfecto T 32

Turbine oils

Application CASTROL Perfecto X 32

The Castrol Perfecto X turbine oil range of lubricants is based upon premium quality mineral oils enhanced with rust and oxidation inhibitors to give maximum protection at high temperatures.

Total Quartz INEO LONGLIFE 5W30

(low SAPS) multigrade oil specially formulated for VAG petrol and diesel engines

Applications Total Quartz INEO LONGLIFE 5W30

• TOTAL QUARTZ INEO LONG LIFE has been developed for the lubrication of the most recent (Euro V) petrol and diesel engines with particle filter.
• TOTAL QUARTZ INEO LONG LIFE is ideal for turbocharged, multi-valve and direct injection engines.
• TOTAL QUARTZ INEO LONG LIFE can be used under the most severe conditions (motorway, inland waterway, city), in all seasons.
• TOTAL QUARTZ INEO LONG LIFE is perfectly suited to vehicles fitted with a catalytic converter or particulate filter.

TITAN CARGO MC 10W-40

Top Performance, fuel-economy oil for a variety of commercial vehicle diesel engines. Specially developed for extended service intervals. Good cold starting and lower oil consumption.

TITAN CARGO MC 10W-40 field of applications:

TITAN CARGO MC 10W-40 has a higher performance capacity than the usual high performance engine oils. Internationally, this type of oil is designated as UHPD (UHPD = Ultra High Performance Diesel Oil). Regardless of the current service life, even older diesel engines can be changed over to TITAN CARGO MC 10W-40 without flushing.

Please note!! Price of TITAN CARGO MC 10W-40 drops automatically in larger quantities.

CASTROL Hyspin Spindle Oil 10

Spindle Oils

Application CASTROL Hyspin Spindle Oil 10

Castrol Hyspin Spindle Oils have been specially formulated to provide outstanding protection against rust and oxidation while demonstrating good lubricity. These types of oils are also referred to as "R and O" oils. Castrol Hyspin Spindle Oils are designed for use in all types of spindle bearings, including high-speed spindle bearings. Spindle E5 has an additional oiliness agent for enhanced lubricity. Castrol Hyspin Spindle Oils are fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers. Hyspin Spindle Oils are classified as follows: DIN 51502 classification – HL ISO 6743/4 - Hydraulic Oils Type HL ISO 6743/2 – Spindle Oils Type FC Hyspin Spindle oils meet or exceed the following industry specifications: Cincinnati Lamb (formerly Milacron) P-45 (FC-22) - Spindle Oil 22 Cincinnati Lamb (formerly Milacron) P-62 (FC-10) - Spindle Oil 10 Cincinnati Lamb (formerly Milacron) P-65 (FC-2) - Spindle Oil 2

Your advantage! Price of CASTROL Hyspin Spindle Oil 10 drops automatically in larger quantities.

CASTROL Iloform PN 226

High performance neat cutting oil

Application CASTROL Iloform PN 226

Iloform PN 226 is specially formulated for use in single die and progressive die presses for medium to heavy deep drawing applications. It is suitable for use on steels, stainless steels and nickel alloy steels

CASTROL Rustilo DWX 30

Dewatering corrosion preventive

Application CASTROL Rustilo DWX 30

Rustilo DWX 30 rapidly removes water from components subsequent to electroplating processes, after machining using soluble cutting fluids, or parts that have been washed. The very thin residual film provides effective medium term protection against corrosion during intermediate storage or transportation. Rustilo DWX 30 can also be used as a lubricant for mild press working, where corrosion protection without further treatment is required. Although Rustilo DWX 30 can be applied by brushing or spraying, its dewatering action is most effective if the articles to be protected can be immersed in a dip tank.

Castrol Vecton Fuel Saver 5W-30 E7

Fuel-saving engine oil

Your advantage! Price of Castrol Vecton Fuel Saver 5W-30 E7 drops automatically in larger quantities.

CASTROL Rustilo DWX 32

Dewatering corrosion preventive

Application CASTROL Rustilo DWX 32

Rustilo DWX 32 is a medium to long term protective for use in severe conditions where a high degree of protection is required. It is ideal for protection of machined components prior to storage or transportation. The product also shows good water displacing properties. Although Rustilo DWX 32 can be applied by brushing or spraying, its dewatering action is most effective if the articles to be protected can be immersed in a dip tank.

CASTROL Optigear BM 320

High Performance Gear Oils

Application CASTROL Optigear BM 320

Optigear BM is suitable for gears and bearings operating under normal to extreme conditions. Extreme pressure additives make Optigear BM suitable where there is a need to maintain high load carrying capacity while protecting against scuffing and shock loading. Optigear BM 68 and BM 220 can also be used as slideway oils subject to a metalworking fluid compatibility check.

Your advantage! Price of CASTROL Optigear BM 320 drops automatically in larger quantities.

CASTROL Transmax ATF Z previously Transmax Z

Automatic Transmission Fluid

CASTROL Techniclean MP Flex

Heavy duty, multi-purpose alkaline cleaner

Application CASTROL Techniclean MP Flex

Techniclean MP Flex is a versatile product, being suited to a wide range of operations in production engineering, as well as being suitable for virtually all ferrous and non-ferrous metals. Techniclean MP Flex can be used for: Industrial process cleaning in a wide range of modern equipment which includes, spray and flood wash, dip and ultrasonic applications. It is capable of removing difficult soils, for example, heavy duty neat cutting, forming oils, greasy and waxy corrosion preventive films, lubrication oils, greases, and carbon. Other applications also include swarf and general workshop grime. Machine tool cleaning of central systems, individual sumps, and other contaminated areas of machine tools. It is suitable for use with all types of soluble metalworking fluids including synthetics. Added to the system on the day before the coolant is due to be discharged will ensure thorough cleaning by the time the entire coolant system is emptied the following day. General purpose maintenance cleaning on floors, walls and other hard surfaces. Mass vibratory finishing in conjunction with abrasive stones (MVF).

Castrol Transmax Manual Z Long Life 75W-80 previously CASTROL Syntrans Z Long Life 75W-80

Manual Transmission Fluid

CASTROL Iloform PN 403

Chlorine free vanishing oil

Application CASTROL Iloform PN 403

Iloform PN 403 is specially formulated for use in light duty sheet metal stamping operations where very low residues are required, in most cases eliminating the need for inter process cleaning. It is specifically suitable for stamping of low to medium collar height aluminium fins, in the refrigeration industry and shows excellent compatibility with the industries special requirements.

CASTROL Optigear BM 150

High Performance Gear Oils

Application CASTROL Optigear BM 150

Optigear BM is suitable for gears and bearings operating under normal to extreme conditions. Extreme pressure additives make Optigear BM suitable where there is a need to maintain high load carrying capacity while protecting against scuffing and shock loading. Optigear BM 68 and BM 220 can also be used as slideway oils subject to a metalworking fluid compatibility check.

Your advantage! Price of CASTROL Optigear BM 150 drops automatically in larger quantities.