Motor oil

Mobilgard ADL 30

Diesel Engine Oils

Application Mobilgard ADL 30

Mobilgard ADL Series lubricants are intended for use in high BMEP engines and in severe duty engine applications where the nature of the fuel and service requires a greater level of detergency/dispersancy and liner lacquer control than is offered by most diesel engine lubricants.

Properties

Castrol EDGE is three times stronger against viscosity breakdown than the leading synthetic and leading conventional oils.

The unique titanium technology physically changes the way oil behaves under extreme pressures doubling its film strength, preventing oil from breaking down and reducing friction to maximize engine performance.

Castrol EDGE with Fluid Titanium has twice the film strength of our previous formula based on the HFRR friction test.

Tested in 5W-30 versus all major conventional brands, Mobil1 and Mobil1 Extended Performance in the ASTM D6278 test.

Castrol EDGE is three times stronger against viscosity breakdown than the leading synthetic and leading conventional oils.

Castrol EDGE FST 0W-40

Properties

Castrol EDGE is three times stronger against viscosity breakdown than the leading synthetic and leading conventional oils.

The unique titanium technology physically changes the way oil behaves under extreme pressures doubling its film strength, preventing oil from breaking down and reducing friction to maximize engine performance.

Castrol EDGE with Fluid Titanium has twice the film strength of our previous formula based on the HFRR friction test.

Tested in 5W-30 versus all major conventional brands, Mobil1 and Mobil1 Extended Performance in the ASTM D6278 test.

Q8 Formula Truck 8610 10W-40 previously Q8 Formula Truck 8600 10W-40

High Performance Synthetic Fuel Saving Heavy Duty engine oil with Low Sulphated Ash, Phosphorus and Sulphur content (Low SAPS) designed for lubrication of latest Euro VI engines.

Applications Q8 Formula Truck 8500 10W-40

For Euro IV, Euro V and Euro VI diesel engines equipped with a diesel particulate filter (DPF) or catalytic after treatment systems (such as SCR) operating on low sulphur diesel fuel (50 ppm or below) and under severe heavy duty conditions.

Best in-class bio-fuel compatibility for excellent cold starting properties

Extended oil drain intervals as indicated by the OEM for high quality diesel engine oils can be applied.

For ACEA E6, E7, E9 and API CJ-4 applications.

Total Rubia Optima 3500 FE 5W-30 Previously Rubia TIR 9900 FE 5W30

Synthetic premium “low-SAPS” diesel-engine oil, used in on-road heavy-duty applications, with FUEL ECONOMY technology.

Applications Total Rubia Optima 3500 FE 5W-30

• Total Rubia Optima 3500 FE 5W-30 is a synthetic new generation lubricant suitable for use in all European Euro 6 applications (DAF, Daimler, Iveco, MAN, Scania, Volvo). It is also compatible with certain gas engines.
• With its “low-SAPS” (low sulphated ash, phosphorus and sulphur) technology, Total Rubia Optima 3500 FE 5W-30 is specifically adapted to the latest generation of diesel engines equipped with post-treatment systems, such as diesel particulate filters (DPFs)
• Total Rubia Optima 3500 FE 5W-30 is especially suitable for IVECO Euro 6 vehicles with extended oil drain intervals as defined by the manufacturer and has the latest approvals of MAN M 3677 and Scania LDF-4, suitable for their Euro 6 engines.

Shell Helix Ultra 0W-40

Fully synthetic motor oil - Shell's most advanced formulation for high-performance engines

Shell Helix Ultra 0W-40 main applications:

• Shell Helix Ultra's fully synthetic formulation offers Shell's maximum protection in very hot and extremely cold climates and severe driving conditions. Shell Helix Ultra can be used for modern gasoline engines, diesel engines (without particulate filters) and gas engines, and it is also suitable for use with biodiesel and gasoline/ethanol blends.
   

Shell Helix Ultra 0W40 uses unique active cleansing technology to help high-performance engines operate at maximum efficiency by helping to protect them from power-robbing deposits and wear. It helps to reduce engine friction to provide enhanced fuel economy

Please note!! Price of Shell Helix Ultra 0W-40 drops automatically in larger quantities.

Shell Rimula R6 Ultra 5W-30

Fully Synthetic Heavy Duty Diesel Engine Oil 5W30

Shell Rimula R6 Ultra 5W-30 main applications:

• On-highway heavy duty applications 

Shell Rimula R6 Ultra oil features “Low-SAPS” additive technology and unique anti-wear system. Shell Rimula R6 Ultra 5W30 is synthetic technology that delivers extended maintenance and fuel economy performance. Suitable for Euro 4, 5, 6 engines.

Your Advantage! Price of Shell Rimula R6 Ultra 5W-30 drops automatically in larger quantities.

CASTROL Hyspin AWS 100

Anti-wear Hydraulic Oil

Application CASTROL Hyspin AWS 100

Hyspin AWS has been specially formulated to provide good anti-wear and thermal stability performance using proven additive technology. The careful blend of additives with a high quality base stock ensures that Hyspin AWS has excellent hydrolytic and oxidative stability while exhibiting a minimal tendency to produce sludge and deposits. In addition, Hyspin AWS provides corrosion protection to ferrous and yellow metal components found within a hydraulic system. This range is designed for use in industrial hydraulic systems which require antiwear protection such as lightly loaded gears, variable speed units and bearings. The Hyspin AWS range is compatible with the most commonly used nitrile, silicone and fluropolymer seal materials. Hyspin AWS is classified as follows: DIN 51502 classification - HLP ISO 6743/4 - Hydraulic Oils Type HM. Hyspin AWS grades meet the requirements (for appropriate viscosity grade) of: DIN 51524 Part 2; Cincinnati Lamb (Milacron) P 68-69-70; Denison (Parker Hannafin); HF-0 US Steel 126 & 127; Eaton (formerly Vickers) I-286-S & M-2950-S; MB – Approval 341.

CASTROL Radicool NF Premix

Ready to use engine coolant and antifreeze

Application CASTROL Radicool NF Premix

Castrol Radicool NF premix has been developed using Hybrid Additive Technology to provide total protection for modern engine radiator systems, cylinder block heads, water pumps and heat exchangers . In the majority of cases, coolants are not compatible and should not be mixed with other coolants unless directed by the equipment manufacturer. If using Castrol Radicool NF Premix for the first time, ensure that the cooling system has been adequately flushed with clean water before use.

CASTROL Variocut G 600 HC

High performance neat cutting oil

Appliciation CASTROL Variocut G 600 HC

Variocut G 600 HC is designed for high speed, creep feed grinding, especially gear grinding of ferrous and yellow metals with CBN and carborundum wheels.

Castrol Vecton Long Drain 10W-40 E7

Helps maximise performance

Application Castrol Vecton Long Drain 10W-40 E7

Castrol Vecton Long Drain 10W-40 E7 is designed for extended drain in modern diesel engines including Euro II, Euro III and Euro IV/V/VI engines where permitted by manufacturers at the specification levels met. It can also be used in offroad vehicles and equipment that require this performance level.

Your advantage! Price of Castrol Vecton Long Drain 10W-40 E7 drops automatically in larger quantities.

Total Quartz INEO MC3 5W-40

PETROL & DIESEL ENGINE OIL SAE 5W-40 SYNTHETIC TECHNOLOGY LOW SAPS

Applications Total Quartz INEO MC3 5W-40

• TOTAL QUARTZ INEO MC3 5W-40 with ART is synthetic engine oil specially formulated to meet the latest ACEA and API international standards and technical requirements of vehicle manufacturers, such as GM, Mercedes-Benz, Volkswagen, or Porsche
• This lubricant is suitable for the most severe conditions of use (door-to-door, sports driving, repeated start-ups, city and motorway driving). Its special formulation resists the most extreme variations in operating temperature. It is particularly well suited to all recent multi-valve engines equipped with turbochargers and direct injection.
• Its Low SAPS technology (Low Content in Sulphated Ash, Phosphorus and Sulphur) makes it the lubricant of choice for optimal operation of the latest-engine generation equipped with anti-pollutant devices.

CASTROL Aircol PD 100

Rotary Screw Compressor Lubricant

Application CASTROL Aircol PD 100

Aircol PD grades are ashless oils recommended for the lubrication of rotors, bearings and gears in rotary compressors, especially the oil flooded screw type with lubricant drain cycles of up to 2000 hours under normal use. Normal use in screw type compressors is defined by a maximum air discharge temperature =/< 100°C as defined by ISO 6743-3:2003. Aircol PD can be used for either normal or severe duty lubrication of reciprocating and rotary drip-feed air compressors, as defined by ISO 6743. Normal duty is described as:- discharge temperatures =/< 165°C; differential pressures =/< 2.5 MPa (25 bar); discharge pressures =/< 7.0 MPa (70 bar). Severe Duty is described as:- discharge temperatures > 165°C; differential pressures > 2.5 MPa (25 bar); discharge pressures > 7.0 MPa (70 bar). Aircol PD compressor oils exhibit low carbon forming tendencies and meet the requirements of the DIN 51506 VDL classification for reciprocating compressors having air discharge temperatures up to 220°C. Selection of the required viscosity grade should be based upon the compressor manufacturers’ recommendation. However as a general guide Aircol PD 32 and 46 are suitable for oil flooded rotary compressors, whereas Aircol PD 68 and 100 would be selected for lubricating the crankcase and cylinders of reciprocating compressors. Aircol PD 150 is recommended for sliding-vane compressors, or for reciprocating units at high ambient temperatures. The Aircol PD range is fully compatible with nitrile, silicone and fluropolymer seal materials. Aircol PD is classified as follows: DIN 51506 classification - VDL; ISO 6743/3 - DAA and DAB for reciprocating air compressors, DAG for rotary air compressors. Aircol PD meets the requirements (for appropriate viscosity grade) of major compressor manufacturers such as Atlas Copco, Champion, Sullair, Compair/Broomwade, Ingersoll-Rand, Kaeser and Bauer.

Total Quartz 9000 ENERGY 0W-30

GASOLINE & DIESEL ENGINE OIL SAE 0W-30 ADVANCED SYNTHETIC TECHNOLOGY

Applications Total Quartz 9000 ENERGY 0W-30

• TOTAL QUARTZ 9000 ENERGY 0W-30 is an advanced synthetic technology engine oil that has been developed to cover the most stringent requirements of both gasoline and diesel passengers cars engines.
• TOTAL QUARTZ 9000 ENERGY 0W-30 is particularly suited to the most recent engines.
• This engine oil can be used in the most difficult operating conditions (motorways, city traffic...), and is appropriate for all driving types and for every season.

Mobil Delvac 1 LE 5W-30

Vehicle Lube Motor oil

Fully Synthetic Heavy-Duty Diesel Engine Oil

Most important applications of Mobil Delvac 1 LE 5W-30 are:

• + Heavy Duty Diesel Engines including Euro V/VI and US EPA 2007/2010 Modern Low Emissions Vehicles, Utilizing Technologies such as Diesel Particulate Filter (DPF), Selective Catalytic Reduction (SCR), Continuously Regenerating Traps (CRT), Diesel Oxidation Catalysts (DOC) and Exhaust Gas Recirculation (EGR)
• + Heavy Duty Diesel Engines using low sulfur diesel fuels and many biodiesel fuel formulations
• + Naturally Aspirated and Turbo-Charged Diesel Powered Equipment
• + On-Highway Short-Haul and Long-Haul Trucks and Buses
• + Off-Highway Mining, Construction and Agricultural Equipment

Pay attention! Price of Mobil Delvac 1 LE 5W-30 drops automatically with higher volumes.

Castrol Vecton Long Drain 10W-40 E6/E9

Helps maximise performance

Application Castrol Vecton Long Drain 10W-40 E6/E9

Castrol Vecton Long Drain 10W-40 E6/E9 is designed for extended drain in the latest Euro 6 diesel engines. It can also be used in low emission Euro 4 & Euro 5 European trucks and buses, especially those requiring a low SAPS lubricant and in older on-road and off-road vehicles and equipment that require this performance level.

Your advantage! Price of Castrol Vecton Long Drain 10W-40 E6/E9 drops automatically in larger quantities.

CASTROL Hyspin AWH-M 15

High viscosity index anti-wear hydraulic oils

Application CASTROL Hyspin AWH-M 15

Hyspin AWH-M contains a shear stable additive system which helps maintain the viscosity characteristics of the product over a wide temperature range even during prolonged use and imparts a very low pour point which enables the product to be used in very cold environments. It exhibits excellent corrosion and wear protection as well as outstanding thermal and oxidative stability. In addition, Hyspin AWH-M has excellent hydrolytic stability and separates rapidly from water contamination upon standing. Applications include: Outdoor equipment which are likely to operate in wide temperature ranges, such as machinery subjected to cold start up conditions and high temperature continuous running. Examples include off-highway and marine applications. Indoor manufacturing equipment that incorporates control systems requiring minimal viscosity change with temperature. Examples include precision machine tools. The Hyspin AWH-M range is fully compatible with elastomer materials commonly used for static and dynamic seals, such as nitrile, silicone and fluorinated (e.g. Viton) polymers. Hyspin AWH-M is classified as follows: DIN 51502 classification – HVLP ISO 6743/4 - Hydraulic Oils Type HV Hyspin AWH-M grades meet the requirements (for appropriate viscosity grade) of: DIN 51524 Part 3 Cincinnati Lamb (Milacron) P 68-69-70 Denison (Parker Hannafin) HF-0 US Steel 126 & 127 Eaton (formerly Vickers) I-286-S & M-2950-SBosch Rexroth RE07075/RE90220

Your advantage! Price of CASTROL Hyspin AWH-M 15 drops automatically in larger quantities.

Mobil Pegasus™ 705

Gas Engine Oil

Made for stationairy Gas Engines / CHP Combined Heat and Power

Most important applications of Mobil Pegasus™ 705 are:

• + High-speed lean-burn and stoichiometric gas engines sensitive to valve seat recession
• + Crankcases and power cylinders of spark-ignited two and four-stroke cycle gas engines
• + Recommended for applications requiring low ash formulations
• + Reciprocating natural gas compressor cylinders
• + High output or ambient rated engines operating at or in excess of rated capacity under high temperatures
• + Engines operating on fuel containing low levels of hydrogen sulphide

Pay attention! Price of Mobil Pegasus™ 705 drops automatically with higher volumes.

Mobil Pegasus™ SR

Gas Engine Oil

Made for stationairy Gas Engines / CHP Combined Heat and Power

Most important applications of Mobil Pegasus™ SR are:

• + Gas engines operating on gas that contains moderate levels of hydrogen sulphide (H2S)
• + Engines operating on gas containing other corrosive materials such as TOHCI (Total Organic Halides as Chloride), landfill or biomass gases. Particularly recommended for gas containing moderate or high level of siloxanes.
• + Spark ignited four-cycle gas engines with very low lube oil consumption
• + Engines experiencing valve train wear and corrosion
• + Light output or naturally aspired engines operating at or in excess of rated capacity under high temperatures
• +

Pay attention! Price of Mobil Pegasus™ SR drops automatically with higher volumes.

CASTROL Perfecto X 46 previously Perfecto T 46

Turbine oils

Application CASTROL Perfecto X 46

The Perfecto X 46 lubricant is based upon premium quality mineral oils enhanced with rust and oxidation inhibitors to give maximum protection at high temperatures.