Your sector

Houghton Macron 400 M-32

Properties

Macron 400 M-32 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

Macron 400 M-32 is free from zinc, chlorine and active sulphur.

Applications

Macron 400 M-32 is a high performance cutting oil for operations on light and medium alloyed steels, aluminium and yellow metals.

Macron 400 M-32 has multipurpose oil characteristics for cutting and hydraulic oil HLP DIN 51524-2 and gear oil CLP DIN 51517-3.

It has a good de-aeration power, does not foam and is not aggressive for the paints on machine tools.

MACRON 400 M-32 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

MACRON 400 M-32 is free from zinc, chlorine and active sulphur. 

Advantages:

• Increased productivity - reduced machine downtime.
• Reduced cost - long sump life.
• Secure handling - fulfills HLP 1 CLP standards.
• Secure handling - high EHS standard.

Q8 El Greco 150

Applications Q8 El Greco 150

Industrial gear drives

Windturbine gears.

Your advantage! Price of Q8 El Greco 150 drops automatically in larger quantities.

Mobil Pegasus 805

Gas Engine Oil

Made for stationairy Gas Engines / CHP Combined Heat and Power

Most important applications of Mobil Pegasus 805 are:

• Caterpillar, Superior, Waukesha and other turbocharged, naturally aspirated, medium to high speed four-cycle engines requiring a low ash oil
• Engines experiencing valve face and seat wear
• Lean-burn and stoichiometric four-cycle engines
• Engines equipped with catalytic converters
• Applications using alternate fuels containing low levels of sulfur or chlorine
• In field gathering operations where sour gas (low levels of H2S) is used as fuel
  
  

Your advantage: Price of Mobil Pegasus 805 drops automatically with higher volumes.

CASTROL SPHEEROL EPL 3

Bearing grease

Application CASTROL SPHEEROL EPL 3

The Castrol Spheerol EPL 3 comprises general purpose greases designed for plant wide lubrication. The range extends from a Castrol Spheerol EPL 3 for general purpose bearing lubrication to a NLGI 00 (see separate data sheet) semi-fluid grease suitable for centralised lubrication systems and grease filled gearboxes.

Castrol Spheerol EPL 3 greases provide good protection against rust and corrosion as well as resistance to water wash-out; which makes them particularly suitable for equipment where moist or wet conditions are common. The stiffer consistency afforded by a Castrol Spheerol EPL 3 grade makes this product particularly suitable for the lubrication of bearings that are vertically mounted, or components exposed to a high degree of vibration. The good levels of resistance to both corrosion and water wash-out, which makes this product suitable for equipment where moist or wet conditions are common.

Your advantage! Price of CASTROL SPHEEROL EPL 3 drops automatically in larger quantities.

CASTROL VARIOCUT B 30

High performance neat cutting oil

Application CASTROL VARIOCUT B 30

Variocut B 30 is designed for arduous broaching of stainless steels and difficult to machine high tensile steel alloys. It is also suitable for gear hobbing, gear cutting and gear shaping. Variocut B 30 contains active sulphur and is not compatible with yellow metals.

Your advantage! Price of CASTROL VARIOCUT B 30 drops automatically in larger quantities.

Houghton Garia 405 M-22

Properties

GARIA 405 M-22 is based on hydro treated mineral oil with low aromatic content. A combination of polar. extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

GARIA 405 M-22 contains active sulphur and may discolour yellow metals.

The oil is zinc and chlorine free.

Applications

GARIA 405 M-22 is the universal oil for the gear shop. It shows excellent performance for the gear grinding as well as for gear hobbing and shaping operations.

GARIA 405 M-22 is used also for the machining of steel and cast iron on automatic turning lathes.

Approvals

Hofler and Klingelnberg.

Houghton Macron 2425 S-14

Properties

Macron 2425 S-14 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces. Macron 2425 S-14 is chlorine and Zinc free.

Applications

Macron 2425 S-14 is a high performance grinding oil, used for flute grinding on high-speed steel, and with ceramic and diamond or boron nitrite grinding wheels.

Macron 2425 S-14 can also be used for grinding spiral toothed bevel gears and flat or cylindrical grinding processes, on the complete range of steels and non-ferrous metals.

Approvals

Product is approved by Liebherr, Kapp, Niles, Junker, Hofler, Klingelnberg.

Q8 El Greco 320

Applications Q8 El Greco 320

Industrial gear drives

Windturbine gears.

Your advantage! Price of Q8 El Greco 320 drops automatically in larger quantities.

Q8 Schumann G 220

Applications Q8 Schumann G 220

Industrial gear oil based on high quality synthetic PAO base oil

Your advantage! Price of Q8 Schumann G 220 drops automatically in larger quantities.

Q8 Vermeer WDS 220

Paper machine circulating oil based on very high quality synthetic base oils (PAO)

Applications Q8 Vermeer WDS 220

Lubrication of industrial paper machine circulating systems for the wet- and dry-end. Q8 Vermeer WDS is formulated to meet the high demands of certain lubrication systems e.g. when steam pressures and bearing temperatures are high.

Your advantage! Price of Q8 Vermeer WDS 220 drops automatically in larger quantities.

Houghton Macron 205 M-8

Properties

Macron 205 M-8 is based on hydro treated mineral oil with low aromatic content. A combination of polar, extreme pressure and anti-wear additives provide the oil with high load carrying properties. The oil provides good surface finish of the machined work pieces.

Macron 205 M-8 is zinc and sulphur free.

Applications

Macron 205 M-8 is a universal honing, superfinishing and grinding oil.

Typical application is in the bearing industry and electronic industry for fine machining of aluminium and yellow metals.

Macron  205 M-8 has higher viscosity compared to other typical honing oils.

Medium term rust preventive oil

Ensis RPO 1200 is a solvent free, oil-based temporary corrosion preventative for metal surfaces likely to corrode in storage or use Ensis RPO 1200 leaves a thin, self-healing, oily, protective film on surfaces requiring temporary protection. It is ideal for use on finished parts, subjected to indoor storage of up to twelve months.

Important properties of Houghton Ensis RPO 1200 (previous name Shell Ensis RPO 1200) are:

• + Indoor protection for 12 months
• + Outdoor covered protection for 3 months
• + No cleaning needed before parts assembling
• + Low volatility
• + High flashpoint

Houghton Garia 404 M-10

Properties

Garia 404 M-10 is a neat cutting oil for machining high alloyed steels, aluminum and magnesium alloys. Garia 404 M-10 is chlorine free, free of heavy metals and it has a low aromatic content. It contains a well balanced combination of polar, extreme pressure and anti-wear additives which gives the oil high load carrying properties. Due to its active sulphur content, the oil may discolor yellow metals.

Applications

Garia 404 M-10 is recommended for:

Grinding

Deep-hole drilling

Taping or broaching of low to medium alloyed steels

Gear hobbing

Machining on automatic lathes

Garia 404 M-10 is used neat as supplied.

TOTAL CERAN GEP

Extreme-pressure water resistant high temperature calcium sulfonate complex grease with solid lubricants.

Applications TOTAL CERAN GEP

• CERAN GEP is pre-eminently designed for use on open gears of rotary drum drives, single and double pinion kiln and mill drives, working under severe circumstances.
• CERAN GEP is particularly adapted for the lubrication of sugar mills (plain bearings, pinions/open gears)
• Always avoid contamination of the grease by dust and/or dirt when applying. Preferably use a pneumatic pump/spray system.

Your advantage! Price of TOTAL CERAN GEP drops automatically in larger quantities.

Castrol Alusol SL 51 XBB

High performance soluble metalworking fluid

Application Castrol Alusol SL 51 XBB

Alusol SL 51 XBB is especially designed for machining of aluminum alloys. The product can also be used for machining of ferrous alloys.

Your advantage! Price of Castrol Alusol SL 51 XBB drops automatically in larger quantities.

Q8 Vermeer WDS 320

Paper machine circulating oil based on very high quality synthetic base oils (PAO)

Applications Q8 Vermeer WDS 320

Lubrication of industrial paper machine circulating systems for the wet- and dry-end. Q8 Vermeer WDS is formulated to meet the high demands of certain lubrication systems e.g. when steam pressures and bearing temperatures are high.

Your advantage! Price of Q8 Vermeer WDS 320 drops automatically in larger quantities.

CASTROL HYSPIN HVI 46 D

Detergent Hydraulic Oil

Application CASTROL HYSPIN HVI 46 D

Castrol Hyspin HVI 46 D also incorporates lubricity additives to give smooth slideway motion on the combined hydraulic and slideway lubrication systems of some grinding and gear cutting machine tools. Castrol HLP-D fluids contain detergency additives which maintain dirt and oil oxidation products in suspension, preventing them from settling out and forming deposits which could impair the free operation of valves, leading to erratic system operation. Machine tool manufacturer's are increasingly specifying HLP-D fluids such as Hyspin HVI 46 D, having recognised their advantages in increased system reliability.

Your advantage! Price of CASTROL HYSPIN HVI 46 D drops automatically in larger quantities.

Shell Tellus S4 ME 32 Previous Name: Tellus EE

Advanced Synthetic Industrial Hydraulic Fluid

Shell Tellus S4 ME 32 main applications:

• Industrial hydraulic systems
• Mobile hydraulic systems
• Environmental impact

Shell Tellus S4 ME 32 hydraulic fluids are designed to help users improve the energy efficiency of their hydraulic systems without compromising the protection of the system or maintenance procedures of their equipment and operations. Shell Tellus S4 ME 32 has been demonstrated to improve energy efficiency in a wide range of applications such as plastic injection moulding, metal pressing, and mining conveyors. In addition, Shell Tellus S4 ME 32 is also designed to help equipment service life and lower maintenance costs through providing outstanding wear protection and long oil life capability

Please note!! Price of Shell Tellus S4 ME 32 drops automatically in larger quantities.

TOTAL MULTIS COMPLEX HV2 Moly

Extreme-pressure and high-temperature complex lithium soap grease.

Applications TOTAL MULTIS COMPLEX HV2 Moly

• MULTIS COMPLEX HV2 Moly is adapted to the lubrication of all applications operating under severe conditions, more particularly under high load and high-temperature constraints for which a conventional lithium soap grease is no longer sufficient.
• MULTIS COMPLEX HV2 Moly is a multipurpose grease, specially formulated for the lubrication of ball bearings, plain bearings, roller bearings, subjected to high loads and for lubrication of any application subjected to impacts and vibrations in transportation, agriculture and off-road vehicles
• MULTIS COMPLEX HV2 Moly is also well-suited to any industrial application in which an NLGI 2 grade high-temperature and extreme-pressure grease is required.

Your advantage! Price of TOTAL MULTIS COMPLEX HV2 Moly drops automatically in larger quantities.

Houghton Garia 602.02 M-15

Properties

Houghton’s Garia™ series line of neat cutting oils contain active chemistry for medium to severe cutting of aluminum, cast iron, steel and stainless steel. Additives ensure long sump life and resistance to dilution with tramp oils.

The oils show excellent results by working with many difficult operations like broaching, deep-hole drilling, tapping, shaping or shaving of gears. 

Using Houghton 602.02 Garia M-15 specifically in deep drilling operations allows higher cutting speeds and greater lubrication providing  very high efficiency combined with minimum wear of cutting heads and drill guides.

Chlorine Free
Low aromatics 
Low oil mist and evaporation 
Good wetting properties
Free of heavy metals

Houghton Garia 602.02 M-15 is a cutting oil that can be used for machining of a wide variety of materials, such as cast iron, copper alloys, aluminum alloys, steel alloys, stainless steel, acid-and heat-resistant steels.

Houghton 602.02 Garia M-15 was designed for difficult machining operations such as deep drilling, drilling, reaming, threading, grinding, broaching and gear cutting on the above mentioned materials. Using Houghton 602.02 Garia M-15 specifically in deep drilling operations allows higher cutting speeds and greater lubricity thereby providing  high efficiency combined with minimum wear of cutting heads and drill guides.