Your sector

GLEITMO 585 K

Heavy-duty paste with white solid lubricants

GLEITMO 585 K field of applications:

GLEITMO 585 K is used for bearings and lubrication points of all types subject to particularly stringent requirements. For lubrication points subject to risk of fretting corrosion or exposed to oscillatory movements and vibration. Owing to the white coloration, GLEITMO 585 K is also used in applications involving clean conditions, amongst others in textile and paper processing and filling and packaging machines.

Please note!! Price of GLEITMO 585 K drops automatically in larger quantities.

Houghton Ensis DW 2462 (formerly Shell Ensis SX)

Ensis DW2462 is a rust inhibitor with drainage properties for medium protection

Ensis DW 2462 is a rust inhibitor with a medium-term protection duration (up to 24 months within storage). Ensis DW 2462 is a solvent-based anti-rust agent with dewatering properties that, after evaporation of the solvent, leaves a temporary waxy film on the metal surfaces to be protected.
Ensis DW 2462 protects metal parts in an efficient way against the damaging effects of humidity, air, detergents and other contaminants. Ensis DW 2462 can be applied by means of immersion or spraying.

Advantages of Houghton Ensis DW 2462 (formerly Shell Ensis DW 2462)are:

• + Protection duration:
  • Inside: 24 months
  • Covered outside: 9-12 months
  • Unprotected outside: 6 months
• + Easy to remove with alkaline or solvent-based cleaners
• + Neutralized fingerprints
• + Short drying time leaves dry thin wax protection film

Mobil SHC 632

Mobil Industrial

Exceptional Performance Gear and Bearing Oils

Most important applications of Mobil SHC 632 are:

• + Filled for life gearboxes, especially high ratio/ low-efficiency worm gears
• + Remotely located gearboxes, where oil change-out is difficult
• + Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
• + Mixer roll bearings and roll neck bearings where high temperatures are encountered
• + Plastic calenders
• + Severe centrifuge applications, including marine centrifuges
• + Railroad A/C Traction Drives
• + Mobil SHC 632 is approved by Siemens AG for use in Flender gearboxes
   

Pay attention! Price of Mobil SHC 632 drops automatically with higher volumes.

Mobil SHC 629

Mobil Industrial

Exceptional Performance Gear and Bearing Oils

Most important applications of Mobil SHC 629 are:

• + Filled for life gearboxes, especially high ratio/ low-efficiency worm gears
• + Remotely located gearboxes, where oil change-out is difficult
• + Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
• + Mixer roll bearings and roll neck bearings where high temperatures are encountered
• + Plastic calenders
• + Severe centrifuge applications, including marine centrifuges
• + Railroad A/C Traction Drives
• + Mobil SHC 629 is suitable for Oil Flooded Rotary Screw Compressors compressing natural gas, field gas gathering, CO2 and other process gasses used in the natural gas industry
   
• + Mobil SHC 629 is approved by Siemens AG for use in Flender gearboxes
   

Pay attention! Price of Mobil SHC 629 drops automatically with higher volumes.

Mobil SHC 636

Mobil Industrial

Exceptional Performance Gear and Bearing Oils

Most important applications of Mobil SHC 636 are:

• + Filled for life gearboxes, especially high ratio/ low-efficiency worm gears
• + Remotely located gearboxes, where oil change-out is difficult
• + Low temperature applications, such as ski lifts where seasonal oil changes can be avoided
• + Mixer roll bearings and roll neck bearings where high temperatures are encountered
• + Plastic calenders
• + Severe centrifuge applications, including marine centrifuges
• + Railroad A/C Traction Drives
• + Mobil SHC 636 is approved by Siemens AG for use in Flender gearboxes
   

Castrol Hysol SL 45 XBB

High performance soluble metalworking fluid

Application Castrol Hysol SL 45 XBB

Hysol SL 45 XBB is especially designed for machining of aluminum and titanium alloys in aerospace industry. The product can also be used for machining of ferrous alloys.

Your advantage! Price of Castrol Hysol SL 45 XBB drops automatically in larger quantities.

Castrol Hysol SL 45 XBB

High performance soluble metalworking fluid

Application Castrol Hysol SL 45 XBB

Hysol SL 45 XBB is especially designed for machining of aluminum and titanium alloys in aerospace industry. The product can also be used for machining of ferrous alloys.

Your advantage! Price of Castrol Hysol SL 45 XBB drops automatically in larger quantities.

CASTROL ALPHASYN EP 150

Synthetic Gear Oils

Application CASTROL ALPHASYN EP 150

The Alphasyn EP 150 have been formulated for use in all types of enclosed gears including heavy and shock-loaded gears and bearings where EP properties are required. Castrol Alphasyn EP 150 are suitable for use in gear boxes where micro-pitting resistance is required and for a wide range of applications in extreme environments, for example mining and quarrying, marine applications and paper production.

Your advantage! Price of CASTROL ALPHASYN EP 150 drops automatically in larger quantities.

CASTROL ALPHASYN EP 150

Synthetic Gear Oils

Application CASTROL ALPHASYN EP 150

The Alphasyn EP 150 have been formulated for use in all types of enclosed gears including heavy and shock-loaded gears and bearings where EP properties are required. Castrol Alphasyn EP 150 are suitable for use in gear boxes where micro-pitting resistance is required and for a wide range of applications in extreme environments, for example mining and quarrying, marine applications and paper production. The use of a PAO base stock provides an inherently high Viscosity Index (VI) and low pour points making these products suitable for use over a wide temperature range.

The Alphasyn EP 150 is fully compatible with nitrile, silicone and fluropolymer seal materials.

Alphasyn EP 150 is classified as follows: DIN Classification is CLP 150

Your advantage! Price of CASTROL ALPHASYN EP 150 drops automatically in larger quantities.

CASTROL Alphasyn PG 320

Synthetic gear oils

Application CASTROL Alphasyn PG 320

Alphasyn PG gear oils are primarily intended for use in worm reduction gear boxes, where the low coefficient of friction of the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures. This is particularly important in applications where sliding contact is high. The use of a PAG base stock provides inherently high Viscosity Index (VI) and low pour points making these products suitable for use over a wide temperature range. Alphasyn PG meets the requirements of most OEM’s that allow the use of PAG based gear oils.

Your advantage! Price of CASTROL Alphasyn PG 320 drops automatically in larger quantities.

CASTROL Alphasyn PG 320

Synthetic gear oils

Application CASTROL Alphasyn PG 320

Alphasyn PG gear oils are primarily intended for use in worm reduction gear boxes, where the low coefficient of friction of the PAG base fluid improves efficiency and consequently reduces power consumption and operating temperatures. This is particularly important in applications where sliding contact is high. The use of a PAG base stock provides inherently high Viscosity Index (VI) and low pour points making these products suitable for use over a wide temperature range. Alphasyn PG meets the requirements of most OEM’s that allow the use of PAG based gear oils.

Your advantage! Price of CASTROL Alphasyn PG 320 drops automatically in larger quantities.

TOTAL BIOHYDRAN SE 46

High thermal stability biodegradable hydraulic fluid

Applications TOTAL BIOHYDRAN SE 46

• Based on saturated synthetic esters BIOHYDRAN SE is designed for demanding hydraulic systems requiring hydraulic fluids with a high thermal stability and good lubricating properties.
• The excellent biodegradability and low eco toxicity make BIOHYDRAN SE particularly suitable when incidental spillages in environmentally sensitive areas can occur : forestry works, public works, water navigation, off-shore, water catchments areas, ski resorts, etc

Your advantage! Price of TOTAL BIOHYDRAN SE 46 drops automatically in larger quantities.

Mobil Rarus SHC 1024

Lubricating oil for air compressors

Main applications of Mobil Rarus SHC 1024 are:

• + Initially recommended for screw and vane compressors.
• + Very suitable for screw compressors with cooling by means of oil injection
• + Machines that have to work under heavy operating conditions.
• + Multistage compressors with a history of strong oil aging use of mineral products.
• + Compressor systems with critical gears and bearings.
• + Compressors in both permanent and mobile setup.
   

Please note ! Price Mobil Rarus SHC 1024 drops automatically with larger quantities.

TOTAL BIOHYDRAN SE 32

High thermal stability biodegradable hydraulic fluid

Applications TOTAL BIOHYDRAN SE 32

• Based on saturated synthetic esters BIOHYDRAN SE is designed for demanding hydraulic systems requiring hydraulic fluids with a high thermal stability and good lubricating properties.
• The excellent biodegradability and low eco toxicity make BIOHYDRAN SE particularly suitable when incidental spillages in environmentally sensitive areas can occur : forestry works, public works, water navigation, off-shore, water catchments areas, ski resorts, etc

Your advantage! Price of TOTAL BIOHYDRAN SE 32 drops automatically in larger quantities.

CASTROL Alphasyn T 46

Synthetic gear oil

Application CASTROL Alphasyn T 46

Alphasyn T grades have been formulated for use in bearings, circulatory systems and moderately-loaded gear systems operating at both high and low temperatures. Alphasyn T should not be used for heavy / shock loaded systems. Alphasyn T is suitable for various applications where a lubricating oil is used under extremes of temperature or variable temperatures, e.g. from hydraulic systems through to large, slow moving gears. All products in the Alphasyn T range have very low pour points and excellent viscosity / temperature characteristics, allowing their use in both low and high temperature applications. The Alphasyn T range is fully compatible with nitrile, silicone and fluropolymer seal materials.

Your advantage! Price of CASTROL Alphasyn T 46 drops automatically in larger quantities.

CASTROL Alphasyn T 46

Synthetic gear oil

Application CASTROL Alphasyn T 46

Alphasyn T grades have been formulated for use in bearings, circulatory systems and moderately-loaded gear systems operating at both high and low temperatures. Alphasyn T should not be used for heavy / shock loaded systems. Alphasyn T is suitable for various applications where a lubricating oil is used under extremes of temperature or variable temperatures, e.g. from hydraulic systems through to large, slow moving gears. All products in the Alphasyn T range have very low pour points and excellent viscosity / temperature characteristics, allowing their use in both low and high temperature applications. The Alphasyn T range is fully compatible with nitrile, silicone and fluropolymer seal materials.

Your advantage! Price of CASTROL Alphasyn T 46 drops automatically in larger quantities.

Mobil Rarus SHC 1026

Lubricating oil for air compressors

Main applications of Mobil Rarus SHC 1026 are:

• + Initially recommended for screw and vane compressors.
• + Very suitable for screw compressors with cooling by means of oil injection
• + Machines that have to work under heavy operating conditions.
• + Multistage compressors with a history of strong oil aging use of mineral products.
• + Compressor systems with critical gears and bearings.
• + Compressors in both permanent and mobile setup.
   

Please note ! Price Mobil Rarus SHC 1026 drops automatically with larger quantities.

Shell Morlina S4 B 220 

New Generation - Advanced Bearing & Circulating Oils based on synthetic technology

Shell Morlina S4 B 220 main applications:

• Applications involving moderate loads
  Shell Morlina S4 B220 is recommended for systems that include moderately loaded gearboxes, worm gear drives, vacuum pumps, and gearboxes with internal backstops subjected extreme temperature variations. The enhanced energy efficiency of Shell Morlina S4 B will help reduce friction in operating equipment and potentially reduce energy consumption.
• Lubricated for life systems
  The long oil life of Shell Morlina S4 B 220 makes is suitable for use in certain ‘lubricated-for-life’ systems.
• Bearing and circulating oil systems
  Shell Morlina S4 B220 is recommended for use in systems containing plain or rolling element bearings, including those with highly loaded bearings commonly found in cement or quarrying applications. Note: Where Bearing & Circulating oils with a lower viscosity is required (ISO VG 32 and 46), please use Shell Corena S4 R.

Shell Morlina S4 B 220 are high performance synthetic bearing and circulation lubricants, manufactured with high performance base fluids. They offer outstanding lubrication performance, including improved energy efficiency, filterability, and long service life even under challenging operating conditions.

Please note!! Price of Shell Morlina S4 B 220 drops automatically in larger quantities.

Mobil Rarus™ 827

Compressor oil for piston compressors

Main applications of Mobil Rarus ™ 827 are:

• + All types of air compressors, but specifically recommended for a reciprocating air compressor
• + Units that work under severe conditions
• + Multistage units with a history of excessive oil degradation of products based on mineral oil
• + They can be used for the lubrication of cylinders and crankcases
• + Compressor systems with critical gears and bearings
• + Compressors used in stationary and mobile applications

The Mobil Rarus 800 series oils are recommended for single and multi-stage air compressors, but are not recommended for air compressors used in compressed air applications. They are particularly effective for continuously high temperatures with discharge temperatures of up to 200ºC. 

Pay attention! Price Mobil Rarus ™ 827 drops automatically with larger quantities.